Omnitron Systems Industrial 10/100BASE-T to 100BASE-X Ethernet Media Converters with PoE Powering

About the Omnitron Systems miConverter 10/100 PoE/D 1119D-0-19Z

The miniature miConverter™ 10/100 PoE/D is a rate-switching 10/100 RJ-45 copper to 100BASE-X fiber industrial media converter that can be powered with Power over Ethernet (PoE) when connected to PoE switches and midspans. It can also be powered with DC power or AC power with an external power adapter. The miConverter 10/100 PoE/D provides reliable and cost-effective fiber extension in a variety of FTTx applications, including fiber to the desktop and Fiber to the Premises.

The miConverter 10/100 PoE/D features fixed fiber connectors and Small Form Pluggable (SFP) transceivers. ST, SC and LC fixed fiber connectors support multimode, single-mode, and single-mode single-fiber. 100BASE-X SFP transceivers enable adaptability to different fiber types and wavelengths, including Coarse Wave Division Multiplexing (CWDM) wavelengths to increase the bandwidth capacity of fiber infrastructure.

The RJ-45 port can auto-negotiate by detecting the speed and duplex-mode of the connected device. Upon connection to the UTP device, the RJ-45 port speed adjusts to either 10Mbps or 100Mbps, and the duplex-mode adjusts to either Full-Duplex or Half-Duplex. Auto-crossover enables the connection to workstations (MDI port) or hub/switches (MDI-X port) without requiring a crossover cable.

DIP-switches enable manual configuration of the RJ-45 port speed and duplex modes, and configuration of Link Modes (fault-detection capabilities) that enable in the identification and isolation of link failures.

Diagnostic data is provided through front-panel LED indicators that assist in network installation and maintenance. The LEDs display the availability of power, port activity, link status, and the speed and duplex modes of the RJ-45 port.

The miConverter 10/100 PoE/D features power redundancy with AC or DC external power options when used with PoE powering. AC power adapter is available in US, Universal and Country/Region specific models. DC power up to 60VDC is available with a terminal connector option.

The miConverter 10/100 PoE/D is available with or without integrated mounting brackets.

Technical Specifications of the Omnitron Systems miConverter 10/100 PoE/D

General Information
Manufacturer	Omnitron Systems
Manufacturer Part Number	1119D-0-19Z
Manufacturer Website Address	http://www.omnitron-systems.com
Brand Name	Omnitron Systems
Product Line	miConverter
Product Series	10/100 PoE/D
Product Model	1119D-0-19Z
Product Name	Industrial 10/100BASE-T to 100BASE-X Ethernet Media Converters with PoE Powering
Product Type	Transceiver/Media Converter
Interfaces/Ports
Total Number of Ports	1
Network (RJ-45)	Yes
DVI	No
USB	No
Management Port	No
PoE Port Type	PD
Number of Network (RJ-45) Ports	1
Media & Performance
Media Type Supported	Twisted Pair Optical Fiber
I/O Expansions
Total Number of Expansion Slots	1.0
Expansion Slot Type	SFP
Number of SFP Slots	1
Network & Communication
Ethernet Technology	Fast Ethernet
Network Technology	10/100Base-T 100Base-X
Power Description
Power Source	PoE
Physical Characteristics
Form Factor	Standalone External Desktop
Height	0.8"
Width	1.7"
Depth	4.1"
Weight (Approximate)	4 oz
Miscellaneous
Green Compliant	Yes
Country of Origin	United States
Environmental Compliance	Waste Electrical and Electronic Equipment Directive (WEEE) Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Restriction of Hazardous Substances (RoHS) 2
Warranty
Limited Warranty	Lifetime

Ratings and Reviews for the Omnitron Systems miConverter 10/100 PoE/D

Questions about the Omnitron Systems miConverter 10/100 PoE/D