About the Perle IRG5541+
IRG5541+ LTE Router with integrated: LTE-A PRO (CAT12 600M / 150M), GPS/GNSS, Wireless LAN (2.4/5 GHz), 4 x 10/100/1000 RJ45 Ethernet, USB-C Port, RS232, 3 x GPIO, IGN (ignition sense pin), Relay output, RS485 half-duplex, IP54 enclosure. GPIO Cable w/4 pin plug and WLAN antennas included.
Perle IRG5541+ LTE Routers and Gateways have the most comprehensive set of features, functionality, and performance to provide primary or failover back-up connectivity to remote infrastructure and assets. These ultra-low-power, rugged, high-performance Cellular Routers, with dual-SIM slots, are easily deployed with no need for training because of the intuitive web GUI. For advanced admin scrips, CLI commands are also available.
- LTE Router for Primary or Failover Connectivity
- Support for 24x LTE Bands and 9x UMTS/WCDMA Bands
- LTE-A PRO CAT12. 600Mbps downlink and 150Mbps uplink speeds.
- 4-port 10/100/1000 Ethernet
- Network connectivity via LTE, 10/100/1000 Ethernet, USB 3.2, and RS232/RS485 Serial
- One GPIO configurable as high side pull-up / dry contact, analog input, digital input, low side current sink output, digital output/open drain, or Pulse Counter.
- One GPIO configurable as Vehicle ignition sense or analog input
- Two Digital Inputs configurable as high side pull-up / dry contact, digital input, or Pulse Counter
- One normally open (NO) relay contact
- Ultra-Low-Power consuming less than 1 Watt in idle mode and 53mW in standby mode
- Rugged die-cast aluminum IP54 enclosure for dust & water ingress
- Shock and vibration resistance certified to MIL-STD-810G, SAE J1455 & EN 61373
- Hazloc per IECEx/IECx, ATEX, & ANSI/ISA Class 1 Div 2
- -40F to 158F ( -40C to 70C ) operating temperature
- GPS / Global Navigation Satellite System (GNSS) Included
- E-Mark Certification, ISO 7637-2, and ISO 16750-2 Compliance
- Built-in battery charge protection, with no requirement for external power conditioning, to safeguard vehicle operation
- Vehicle awareness applications can be used to remotely monitor vehicle speed, acceleration, position, and more.
- Ignition Power Management can schedule a delayed shutdown or startup of the IRG5541+ based on the vehicle ignition status
- European Railway Certifications EN50155 & EN50121
- International Railway Certifications IEC60571 & IEC62236
- Cellular tower connectivity can be established and maintained at up to 360kph (224mph)
With extensive protocol routing support (RIP, OSPF, BGP-4, IPv4, IPv6, OpenVPN, IPSec VPN, and DHCP), integrated zone-based policy firewall, 2 Factor Authentication, and remote authentication (RADIUS, TACACS+) management, the IRG5541+ LTE Router will integrate seamlessly with enterprise-grade systems in hierarchical or large mesh network structures to control access to devices in the field and protect inside networks from unauthorized access.
Ratings and Reviews for the Perle IRG5541+
( reviews)
% of reviewers would recommend this product to a friend ( out of )
Be the first to write a review
Posted by: on
Overall:
out of found this review helpful
Was this review helpful? Yes | No
x
Write a Review for this product
Questions about the Perle IRG5541+
Be the first to ask a question
Questions | Answers
Displaying - of questions
Posted on
A:
Answered by: on
out of found this answer helpful
Was this answer helpful? Yes | No
Displaying - of questions
x
Ask a question about this product
Close x
Answer a question about this product