Tripp Lite SmartPro 3000NET UPS

About the Tripp Lite SmartPro

Tripp Lite's SMART3000NET intelligent, line interactive large tower UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 23 minutes half load runtime and 7 minutes fully loaded. Runtime is expandable with optional BP24V33 external battery packs. 3000VA / 2400 watt power handling capability supports a variety of networking, telecom and other sensitive electronic applications. Includes 8 protected outlets. Supports remote monitoring of UPS and site power conditions via built-in RS-232 enabled monitoring port, plus standard UPS monitoring via 2 built in contact closure ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Supports SNMP with optional external SNMPWEBSOLO adapter. Built-in audible alarm and front panel LEDs indicate line power, battery power, battery charge level, load level, plus voltage regulation status. Network grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges. Attractive large gray tower housing. Two year warranty with $250,000 connected equipment insurance.

More from the Manufacturer

Technical Specifications of the Tripp Lite SmartPro

General Information
Manufacturer	Tripp Lite by Eaton
Manufacturer Part Number	SMART3000NET
Manufacturer Website Address	https://tripplite.eaton.com/
Brand Name	Tripp Lite by Eaton
Product Line	SmartPro
Product Name	SmartPro 3000NET UPS
Product Type	Line-interactive UPS
Technical Information
Plug/Connector Type	NEMA L5-30P
Receptacle Type	NEMA 5-20R NEMA 5-15R
Receptacle Detail	4 x NEMA 5-20R 4 x NEMA 5-15R
Cord Length	8 ft
Transfer Time	4 ms
Power Description
Load Capacity (VA)	3000 VA
Load Capacity (Watt)	2400 W
Input Voltage	120 V AC
Output Voltage	120 V AC
Management
Network Management	SNMP Manageable
Alarm	On Battery
Controls/Indicators
Status Indicators	Includes 5 front panel LEDs to indicate BATTERY CHARGE LEVEL, AC LINE POWER STATUS, VOLTAGE REGULATION STATUS, UPS LOAD LEVEL and BATTERY LOW / REPLACE information
Battery Information
Battery Chemistry	Lead Acid
Backup/Run Time (Full Load)	7 Minute
Backup/Run Time (Half Load)	23 Minute
Battery Life	6 Year
Typical Battery Recharge Time	4 Hour
Environmental Conditions
Maximum Operating Temperature	104°F (40°C)
Physical Characteristics
Height	17"
Width	9"
Depth	13"
Form Factor	Tower
Weight (Approximate)	80 lb
Miscellaneous
Package Contents	SmartPro 3000NET UPS SMART 3000NET UPS System PowerAlert Software and three 6 foot network cables Warranty information Instruction manual
Additional Information	SMART3000NET line interactive UPS offers battery derived AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression 3000VA / 2400 watt power handling capability supports a variety of networking, telecom and other sensitive electronic devices Large internal batteries offer runtimes of 23 minutes at half load (1500VA / 1200 watts) and 7 minutes at full load (3000VA / 2400 watts) Runtime is further expandable with optional external BP24V33 battery packs Automatic Voltage Regulation (AVR) circuits maintain 120V nominal output over an input voltage range of 87-140V Includes 8 fully protected outlets (4 NEMA 5-15R & 4 NEMA 5-15/20R) with 2 single outlet load banks that can be individually powered off and back on again via software interface PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user defined script commands Offers simultaneous monitoring of up to 3 directly connected devices through included DB9 contact closure and RS-232 enabled interfaces, or the monitoring of any number of additional servers over IP with included PowerAlert monitoring software In addition to the contact closure monitoring of on battery, low battery and power restored messaging, built-in RS-232 interface supports messaging of UPS and line power status, including AC line voltage, DC battery voltage and remaining battery capacity Supports activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment Diagnostic LEDs (indicate 17 performance conditions) UL (USA), cUL (Canada), NOM (Mexico), FCC Class B (Residential) Listed $250,000 Ultimate Lifetime Insurance (USA & Canada Only)
Certifications & Standards	UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications
Country of Origin	China
Warranty
Limited Warranty	3 Year

Ratings and Reviews for the Tripp Lite SmartPro

Questions about the Tripp Lite SmartPro